Raspberry pi Zero - Motioneye OS - Streaming Camera

Hardware Requirement

1. Raspberry pi Zero w board

2. 8GB Micro SD card

3. 5v/2Amp Microusb Power supply

Additional Requirements

1. Windows PC for motion eye os download and burn image to SD card

2. SD formatter and win32 Diskimager on windows PC

First download motioneye os from https://github.com/ccrisan/motioneyeos/releases.in this link so many OS available for different board.But we download motioneyeos-raspberrypi-20190911.img.xz. Its only one OS suitable for Raspberry Pi Zero w board others will not works.

Burn the download image to the MicroSD card with win32 diskimager and also copy the wpa_supplicat.conf file on the SD card (Please refer my previous post).

Then insert the SD card to Raspberry pi Zero w board and find the IP address of the board using advanced IP scanner and also connect a camera on CSI port of Raspberry pi Zero w

In windows PC, use browser either chrome or IE, enter the IP address of Raspberry pi Zero w board in address bar (http://your Raspberry IP address). we will see the login page. username:admin , password: (not set on first booting). directly press Enter.

You can configure everything in your web user interface. We recommend taking a look at the following configurations when configuring the MotionEyeOS for the first time.

1. Go to the three bars menu, and open the General Settings;

2. Enable Advanced Settings;

3. You can change the admin username and set a password;

4. You can also set a name for a surveillance user, and its corresponding password;

5. Set your timezone and a hostname.

Click the orange button at the top right “Apply” to apply the changes – this will require a reboot.